The first step in repairing a garage door spring is determining which type of spring you need to replace. The paint on the end of the spring will help you identify the type of spring you need. Many big box stores and online retailers sell garage door parts. You can also measure the height of your door in inches and divide this measurement by half to get the correct length for the spring.
Table of Contents
Types of garage door springs
Garage door springs come in a wide variety of designs. Make sure to correctly measure a damaged spring before attempting to replace it. You may use a measuring tape for this. Measure the distance from the top of the door to the end of the last coil. Then, divide this distance by 20 to determine the diameter of the spring. Most torsion spring coils are close to 5 inches long, so this measurement should be accurate. If the measurement is off even a fraction of an inch, you can end up ordering the wrong spring.
Torsion springs are another type of spring to repair. These springs are designed to withstand considerable force. They are paired with safety cables to prevent the spring from shooting free. This safety mechanism is designed to protect homeowners in an emergency, such as a broken cable. It’s important always to check that the safety cable is in place.
Your garage door’s springs are an essential component. Torsion and extension springs are the two primary varieties of garage door springs. Understanding the differences between these two types can help you choose the right type for your garage door and extend its service life. Visit https://coastalgaragedoors.com to learn more about the types of garage door springs.
How to measure a garage door spring
Whenever a spring breaks and has to be replaced, the first thing you should do is measure its length. It is usually done by using a tape measure. You can also use the companion spring to determine the length. Once you have the length of the broken spring, you can divide that number by the number of coils to determine the diameter of the wire.
To find the spring size, you need to know its length, wire size, inside diameter, and spring wind. It is essential to know these measurements because they will ensure the longevity of your garage door. The Door & Access Systems Manufacturers Association (DASMA) has established guidelines for correctly measuring garage door springs. It will assist consumers in choosing the proper springs and help retailers organize their products.
When measuring a torsion spring, you should do it when the spring is not in tension. It is because the broken spring will have more tension. Also, it can be dangerous to measure broken torsion springs without proper protection. Always measure the torsion spring separately, not in one piece, to ensure safety.
To measure a torsion spring, you need to know its winding direction. There are two types of springs: right wound and left wound. The directions of the winding cones are different in both cases, so you should make sure you understand the orientation of each spring. Once you have figured out the wind direction, measure the remaining length of the spring, taking note of the size of the broken spring.
Cost to repair a garage door spring
A garage door spring may be repaired for a variety of prices. It depends on the spring type, condition, where you live, and the company you hire. According to national trade associations, repairing one spring can cost anywhere from $150 to $350. It is frequently advisable to hire an expert to complete the task.
Hiring a professional garage door spring repair company is best to save money. Professionals can usually replace the springs quickly and usually do it for around $300 to $350. If you choose to do it yourself, ensure you have the right tools and experience to complete the task. It will save you stress, time, and money.
A garage door spring repair professional will lubricate and adjust the springs and tighten any loose screws and cables. They will also check the drums and rollers. If you decide to do it yourself, remember that the work is dangerous and requires two technicians. You will also require gloves and safety glasses.
Garage door springs are made from different materials. Some are made of oil-tempered steel, while others are made of galvanized steel. The former type of garage door spring has a long life but is more expensive. Galvanized springs are more modern and durable but require annual adjustment. Powder-coated ones are non-oily and have an electrically-bonded paint coating. On the other hand, extension springs are much cheaper than torsion springs. Compared to torsion springs, they are easier to install and require less maintenance.